Phillips 66 Machinist - Ferndale Refinery in Ferndale, Washington
. Phillips 66 & YOU - Together we can fuel the future
Phillips 66 has more than 140 years of experience in providing the energy that enables people to dream bigger and go farther, faster. We are committed to improving lives, and that is our promise to our employees and our communities. We are sustained by the backgrounds and experiences of our diverse teams, which reflect who we are, the environment we create and how we work together. Our company is built on values of safety, honor and commitment. We call our cultural mindset Our Energy in Action, which we define through four simple, intuitive behaviors: We work for the greater good, create an environment of trust, seek different perspectives and achieve excellence. Phillips 66 was recognized by Forbes as one of “America’s Best Employers” in 2021.
The Machinist is primarily responsible for the maintenance of rotating equipment in the refinery including troubleshooting, mechanical repair, replacement, alteration, and preventative maintenance. Rotating equipment assets include centrifugal pumps, Sundyne pumps, fans, gearboxes, turbines, seal systems, centrifugal and reciprocating compressors, injection pumps, etc. This position utilizes various hand tools, power tools, specialty tools, mobile equipment, specialty shop tools, lathes, mills, balancing machines, and personal protective equipment (PPE).
The work is split between outdoor work and shop work, both in an industrial environment. The employee must possess the fitness and ability to perform the tasks safely and responsibly under normal supervision. The tasks listed below are typical, but do not limit assignments.
Responsibilities May Include
Demonstrates commitment to safety and health excellence through strong personal engagement, recognizing and stopping unsafe behavior, recognizing and eliminating safety hazards, following safe practices and procedures, and striving for continuous improvement of safety in the refinery.
Perform pump, compressor, turbine, gearboxes, and fan repairs and overhauls.
Make repairs that alleviate problems and improve bad actors.
Basic troubleshooting of pumps, turbines, compressors, gearboxes, API seal systems, and fans as requested.
Perform turbine trips and make adjustments on trip mechanisms as needed.
Ability to balance equipment using accepted tolerances.
Assemble and disassemble equipment, while taking required measurements, and make judgement calls on repairs based on those readings.
Ability to machine sleeves, bushings, and wear rings based on measurements from as found equipment or drawings.
Expected to use manuals, drawings, and standards to repair equipment and make basic upgrades to improve equipment as overhauls occur in the shop.
Take as found field measurements of pump, base, and piping and make suggestions for improvements prior to re-install.
Be a self-driven employee, with the ability to find information and solve problems independently, by offering solutions to difficult scenarios or making basic improvements on your own.
Work effectively in teams or alone and in the field or the shop.
Legally authorized to work in the job posting country.
High School diploma or GED
Valid driver’s license
Must have a journey-level certification in millwright or machinist from either a registered apprenticeship program or NCCER training program
5 years or more of direct experience performing work as millwright or machinist craft in an industrial environment
Willing and able to perform and comply with the following:
Travel up to 5% of the time
Work extended hours, which may include evenings, weekends and holidays
Be on call 24/7/365
Respond to refinery emergencies during off-hours
Work safely near large, hot, high-speed machines
Climb ladders and stairs up to 200 feet in height
Transport articles up to 50 pounds
Work around chemicals, including acids and bases
Work around hydrocarbons under high pressure and heat
Work outside in harsh weather conditions
Wear fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear and eye protection)
Maintain your face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven)
Possess a valid Driver’s License
Willing and able to obtain a Transportation Worker Identification Card (TWIC)
10 or more years as journey-level millwright machinist working on rotating equipment in a refining or petrochemical industry
Experience working while in supplied air
Knowledge of basic shop mathematic, pump API tolerances, API 697 Repair Standard
Ability to read and interpret manuals, procedures, mechanical drawings, P&IDs, as well as create isometric and plan view sketches
Ability to effectively communicate with others including collaborative interpersonal skills, providing clear explanations, constructive listening, understanding instructions, and asking questions as appropriate
Effective written communication skills pertaining to documenting inspection and repair information
Knowledge of SAP, scheduling, and CAD applications
Proficient in Microsoft Office
Strong and effective communication skills (verbal and written) in both individual and group settings
Knowledge of PSM
Knowledge of safe work practices
The Ferndale Refinery is located on Puget Sound in Ferndale, Washington, approximately 20 miles south of the U.S.-Canada border. Facilities include crude distillation, naphtha reforming, fluid catalytic cracking, alkylation and hydrodesulfurization units. It processes a variety crude oils, including Alaskan North Slope, Canadian and other foreign and U.S. shale crudes, primarily delivered via marine vessel and pipeline. Within the refinery is a rail car crude oil receiving facility with a capacity of 30,000 BPD. This offloading facility, owned by Phillips 66 Partners, makes the receipt of additional crude by rail car possible. The refinery produces a high percentage of transportation fuels. Other products include residual fuel oil, which is supplied to the northwest marine bunker fuel market. Most refined products are distributed to customers by pipeline and barge to major markets in the northwestern United States.
To be considered
In order to be considered for this position you must complete the entire application process, which includes answering all prescreening questions and providing your eSignature on or before the requisition closing date of July 30, 2021.
Candidates for regular U.S. positions must be a U.S. citizen or national, or an alien admitted as permanent resident, refugee, asylee or temporary resident under 8 U.S.C. 1160(a) or 1255(a)(1). Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
Phillips 66 is an EEO and Affirmative Action Employer of Women/Minorities/Veterans/Individuals with Disabilities
Requisition ID: 54303
Location: Washington - Ferndale
Job Field: Maintenance
Division : Ferndale Refinery
Technical Req : No